Step-by-Step Laminate Floor Installation
Installing laminate flooring is an excellent way to transform your home with a sleek, modern finish. In this step-by-step guide on how to install laminate floors, we’ll walk you through the entire process, from preparation to those final finishing touches for flooring edges. Follow these simple steps to achieve a professional-looking result and avoid common installation mistakes.
Step 1: Gather Your Tools and Materials
- Underlay
- Spacers
- Tape measure
- Utility knife
- Pull bar and tapping block
- Saw (jigsaw or miter saw)
- Pencil and straight edge
Step 2: Prepare the Subfloor
Proper subfloor preparation is essential for a flawless finish.
- Remove old flooring and debris
- Ensure subfloor is clean, dry, and level
- Fill any gaps or cracks
- Use a moisture barrier if installing over concrete
Step 3: Choose the Right Underlay
Proper underlay selection impacts comfort and durability.
- Foam underlay for basic cushioning and soundproofing
- Combination underlay for moisture and thermal protection
- Roll out underlay and trim to fit the room
- Tape seams to prevent shifting
Step 4: Plan Your Layout
- Measure the room dimensions
- Decide on plank direction (typically parallel to the longest wall)
- Mix planks from different boxes for a natural look
- Calculate row width to avoid narrow strips at the edges
Step 5: Start Laying the First Row
- Use spacers to leave a 10mm expansion gap around the perimeter
- Lay the first plank with the tongue side facing the wall
- Connect planks end-to-end using the click-lock system
- Cut the last plank to fit, saving the offcut for the next row
Step 6: Install the Remaining Rows
- Stagger plank joints by at least 30cm
- Angle and click planks into place
- Use a tapping block to secure snug connections
- Check for gaps and realign as needed
Step 7: Cut Planks for Obstacles
- Measure and mark plank cutouts for pipes or door frames
- Use a jigsaw for precise cuts
- Ensure a tight fit, leaving a small expansion gap
Step 8: Add the Finishing Touches for Flooring Edges
- Remove spacers from the expansion gap
- Install skirting boards or quarter round trim
- Use threshold strips between rooms
- Seal gaps with color-matching sealant if needed
Step 9: Final Checks and Clean-Up
- Inspect for loose planks or uneven sections
- Clean the floor with a soft broom or vacuum
- Avoid heavy furniture for 24 hours to allow settling
By following this step-by-step guide on how to install laminate floors, you can confidently upgrade your space with durable, beautiful floors. Careful subfloor preparation, proper underlay selection, and attention to finishing details ensure long-lasting results. Avoid common installation mistakes, take your time, and enjoy the satisfaction of a job well done!
Comments are closed.